esd diodes 1 publication date: 30 june, 2003 ske00019aed mazw000h series silicon planar type for surge absorption circuit features ? two elements anode-common type ? sss-mini type 3-pin package absolute maximum ratings t a = 25 c unit: mm parameter symbol rating unit total power dissipation * p tot 150 mw junction temperature t j 150 c storage temperature t stg ? 55 to + 150 c common electrical characteristics t a = 25c 3c note) * :p tot = 150 mw achieved with a printed circuit board. parameter symbol conditions min typ max unit zener voltage * v z i z specified value v zener rise operating resistance r zk i z specified value ? zener operating resistance r z i z specified value ? reverse current i r v r specified value a 1.20 0.05 0.52 0.03 0 to 0.01 0.15 max. 5? 0.15 min. 0.80 0.05 0.15 min. 0.33 (0.40) (0.40) 12 3 5? 0.80 0.05 1.20 0.05 +0.05 ?.02 0.10 +0.05 ?.02 0.23 +0.05 ?.02 refer to the list of the electrical characteristics within part numbers internally connected circuit 1 3 2 note) 1. measuring methods are based japanese industrial standard jis c 7031 measuring methods for diodes. 2. electrostatic breakdown voltage is 10 kv test method: iec1000-4-2 (c = 150 pf, r = 330 ? , contact discharge: 10 times) y 3. * : the temperature must be controlled 25c for v z mesurement. v z value measured at other temperature must be adjusted to v z (25c) v z guaranted 20 ms after current flow. 1: cathode 1 2: cathode 2 3: anode 1, 2 sssmini3-f1 package
mazw000h series ske00019aed 2 MAZW062H 5.8 6.2 6.6 5 0.2 4 50 100 62 mazw068h 6.4 6.8 7.2 5 0.1 4 30 60 68 mazw082h 7.7 8.2 8.7 5 0.1 5 30 60 82 mazw100h 9.4 10.0 10.6 5 0.05 7 30 60 10 mazw120h 11.4 12.0 12.7 5 0.05 9 30 60 12 electrical characteristics within part numbers t a = 25c 3c v z (v) i r ( a) r z ( ? )r zk ( ? ) i z v r i z = 5 ma i z = 0.5 ma min nom max (ma) max (v) max max part number marking symbol note) 1. the v z value is the one after power application for 20 ms at t a = 25 c. 2. the zener voltage temperature coefficient is the one for t j = 25 c to 150 c. zener voltage zener operating resistance reverse current (dc) p tot ? t a i z ? v z i f ? v f r z ? i z s z ? i z c t ? v r 10 ? 3 468101214 10 ? 2 10 ? 1 1 10 10 2 zener voltage v z ( v ) zener current i z ( ma ) t a = 25 c mazw120h mazw100h mazw082h mazw068h MAZW062H 0 0 200 160 120 80 40 50 100 150 200 250 ambient temperature t a ( c ) total power dissipation p tot ( mw ) print foil t = 0.035 mm k a 10 mm 0.8 mm 10 mm 10 ? 2 0 0.2 0.4 0.6 1.0 0.8 1.2 10 ? 1 1 10 10 2 forward voltage v f ( v ) forward current i f ( ma ) t a = 25 c 10 ? 1 1 10 10 2 zener operating resistance r z ( ? ) 11010 2 zener current i z ( ma ) t a = 25 c mazw082h mazw100h mazw068h mazw120h MAZW062H 0 12 10 8 6 4 2 0 102030405060 zener current i z ( ma ) temperature coefficient of zener voltage s z ( mv / c ) t a = 25 c to 150 c mazw082h mazw068h MAZW062H mazw100h mazw120h 0 10 0 20 4812 30 terminal capacitance c t ( pf ) reverse voltage v r (v) t a = 25 c mazw068h MAZW062H mazw082h mazw100h mazw120h
request for your special attention and precautions in using the technical information and semiconductors described in this material (1) an export permit needs to be obtained from the competent authorities of the japanese government if any of the products or technologies described in this material and controlled under the "foreign exchange and foreign trade law" is to be exported or taken out of japan. (2) the technical information described in this material is limited to showing representative characteris- tics and applied circuits examples of the products. it neither warrants non-infringement of intellec- tual property right or any other rights owned by our company or a third party, nor grants any license. (3) we are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) the products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instru- ments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (5) the products and product specifications described in this material are subject to change without notice for modification and/or improvement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (6) when designing your equipment, comply with the guaranteed values, in particular those of maxi- mum rating, the range of operating power supply voltage, and heat radiation characteristics. other- wise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) when using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) this material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. 2002 jul
|
